In a country where full-size sedans are not the mainstream, and the station-wagons are getting pretty much neglected, funeral agencies in Brazil are currently using smaller hearses based on compact coupé-utilities very popular in the local automotive market.
Altough the short cargo tray, usually less than 6ft.-long, may not be deemed suitable to carry a casket, it's stretched from the rear overhang by means of a fiberglass insert totally integrated to the canopy used to enclose the compartment, ensuring the required dignity to the last trip. There's also a liner, integrated with the canopy and the rear extension too, providing an easy-to-clean surface without gaps.
The external layout of the vehicle ends up holding some resemblance to European hearses, which are often fitted with panoramic windows.
One of the most popular models to be converted into a hearse is the Chevrolet Montana, known in Mexico as Chevrolet Tornado and in South Africa as Chevrolet Utility. The engine is a flexfuel 1.4L 4-cylinder, backed by a front-driven 5-speed manual transmission.
Thursday, August 01, 2013
Monday, July 01, 2013
Cargo tricycles: increasing popularity in Uruguay
Due to high gasoline prices and a recent ban on the registry of new Diesel-powered light vehicles, small utility tricycles like the Chinese-made Yumbo Cargo 125 are increasing their market share in Uruguay. Altough the low output and limited performance (max. speed around 60km/h) turn them pretty unsafe for highway traffic, they're a reasonable option for urban jobs such as parcel delivery or even just as a personal commutter for those who don't feel safe to ride a regular motorcycle.
Despite the lack of weather protection, tricycles like the Yumbo Cargo 200 are an effective solution to urban light hauling due to their lower operational cost compared to a regular 4-wheeled compact van such as the Peugeot Partner, which currently is not available in Uruguay with Diesel engines anymore.
Despite the lack of weather protection, tricycles like the Yumbo Cargo 200 are an effective solution to urban light hauling due to their lower operational cost compared to a regular 4-wheeled compact van such as the Peugeot Partner, which currently is not available in Uruguay with Diesel engines anymore.
Friday, June 14, 2013
Advantages of evaporative cooling in cash-transit vans
![]() |
| Brazilian armored cash-transit van, based in a local derivative of the Mercedes-Benz Vario, with 2 roof-mounted evaporative coolers |
Comparing to a regular air-conditioner, the effect of an evaporative cooling setup over the fuel consumption is more negligible, not just due to its ligther weight increasement but also due to the lower mechanical load, since it doesn't require an engine-driven compressor. Instead of using a synthetic gas, it uses only water as the cooling fluid, which also reflects as an environmental benefit since the most usual refrigerant gas commercially available is HFC-134, also known as R-134a, ranked among the so-called greenhouse gases and with a lifespan longer than carbon dioxide when released in the atmosphere. And meanwhile R-134a requires an energy expense to be manufactured, evaporative coolers can use rainwater.
![]() |
| The Brink's Company uses rainwater collectors in all its Brazilian branches |
Saturday, June 01, 2013
4-cylinder Diesel engines: the best response to the claim for better fuel-efficiency in trucks
We all know Americans love trucks, and they also have their loyal enthusiasts in export markets. A good example is the Cadillac Escalade EXT, which offers a good balance of luxury and heavy-duty capabilities. There is, however, a significative downside regarding those vehicles: the fuel-efficiency is compromised by their size and weight..
Many commercial trucks with a GVWR that often doubles the Escalade, such as the Isuzu NPR, are available with engines ranging from 3.0L to 5.2L, and still leave a good safety margin for towing in case of engine swap...
It's worth to remember the technical evolution regarding Diesel emissions aftertreatment, which can lead to an end to the misconceptions pointing these engines as "filthy". At the long run, they're even cleaner than a comparable gasoline-electric hybrid driveline, not just due to the lower energy spent to manufacture a Diesel engine but also the lower amount of raw materials in opposition to a complete hybrid setup with the electric motor, additional electronic controllers and the traction battery pack.
Another feature that evolved significantly in the 4-cylinder Diesels is the acoustic comfort. A good example is Mercedes-Benz: its earlier Diesels still used to clatter a little even tough the indirect injection makes it less noisy, and also used to feel quite underpowered comparing to a gasser in spite of the increased fuel-efficiency. But nowadays, with turbocharging and advanced electronic engine management, even the flagship S-Class is available with a 2.1L 4-banger Diesel. The common-rail injection, due to the multiple jets for every injection cycle, improves the sound deadening and also makes the engine run smoothier.
Often, the unavailability of Diesel versions for some SUVs, like the Chevrolet Suburban, is pointed as a prejudice to increase their global presence, altough some enthusiasts claim that only a huge V8 can lead to the genuine American "soul" into them. That perception of the amount of cylinders as a premium feature is quite dumb, since it also increases the internal frictions inside the engine, decreasing its efficiency...
However, even when there is a Diesel engine available for an American truck, it's usually bigger than it's really necessary for many operators. Okay, it can be cool to have a massive Diesel V8, but often a 4-cylinder can already get the job done. For example, the GMT400 trucks had the IDI boat-anchor 6.5L V8 turbodiesel available in North America, meanwhile its Brazilian counterparts were available with a 4.0L 4-cylinder Maxion S4T and a 6-cylinder MWM Sprint 6.07 TCA, both featuring direct injection. Not every truck buyer requires a torque amount greater than what a gasser V8 is able to provide, but the RPM bands of a Diesel are desirable even if it's a 4-cylinder, like in a walk-thru van.
Nowadays, it's no surprise that 4-cylinder turbodiesels are getting an increased popularity even among the hot-rodding folks, most notably the Cummins 4BT, which can develop over 200hp for relatively cheap but, altough these power figures can sound unimpressive, the high torque and the lower fuel consumption than a comparable gasser are a premium.
In many markets, 4-cylinder turbodiesels nearly eliminated 6-cylinder and V8 gasser trucks. One of the most notable cases is the Land Rover Defender. It was available with the Rover 3.9L V8 gasser until '97, and after the demise of this engine there were versions fitted with the BMW M52 2.8L straight-6 catering to the South African market until 2000. Since then, however, there is no gasser Defender and, after the demise of the 2.5L Td5 (5-cylinder turbodiesel) in 2007 due to emissions regulations, the only engines available for the Defender were 4-cylinder turbodiesels shared with the Ford Transit van, being a 2.4L until 2012 when a 2.2L replaced it also for emissions-related reasons.
In Brazil, for example, in '97 the Ford F-1000, local equivalent to the F-250, was available with a 2.5L Maxion HSD in a 2WD version, altough it was phased out for the following year. The 300cu.in. (4.9L) straight-6 was available for the 2WD F-1000, but wasn't so popular. In the 4WD F-1000, the 4.3L MWM X10 was the only option, mostly favored for its ruggedness in harsh environments.
In a worldwide base, 4-cylinder Diesel engines have been regarded as an effective balance between capability and fuel-efficiency. Even in special applications, such as ambulances.
Usually, massive V8 gassers, or eventually flexfuel, are the most usual engine option for an American full-size truck, altough other options could also provide a fair performance with improvements to the fuel savings. I can't deny my favorite choice are Diesel engines, due to their higher thermal efficiency, adaptability to alternative fuels, and also because they're cool too. With the right gear ratio selection, even some 4-cylinder turbodiesels, with a displacement considerably below the 6.2L of the currently-offered V8, can be a good match to an Escalade while not feeling underpowered at all.
Many commercial trucks with a GVWR that often doubles the Escalade, such as the Isuzu NPR, are available with engines ranging from 3.0L to 5.2L, and still leave a good safety margin for towing in case of engine swap...
It's worth to remember the technical evolution regarding Diesel emissions aftertreatment, which can lead to an end to the misconceptions pointing these engines as "filthy". At the long run, they're even cleaner than a comparable gasoline-electric hybrid driveline, not just due to the lower energy spent to manufacture a Diesel engine but also the lower amount of raw materials in opposition to a complete hybrid setup with the electric motor, additional electronic controllers and the traction battery pack.
![]() |
| Mercedes-Benz 240D: features one of the most dependable engines ever made, but had its limitations regarding performance and acoustic comfort |
Often, the unavailability of Diesel versions for some SUVs, like the Chevrolet Suburban, is pointed as a prejudice to increase their global presence, altough some enthusiasts claim that only a huge V8 can lead to the genuine American "soul" into them. That perception of the amount of cylinders as a premium feature is quite dumb, since it also increases the internal frictions inside the engine, decreasing its efficiency...
![]() |
| GMC 6-100/6-150: Brazilian equivalent of the 3500HD |
Nowadays, it's no surprise that 4-cylinder turbodiesels are getting an increased popularity even among the hot-rodding folks, most notably the Cummins 4BT, which can develop over 200hp for relatively cheap but, altough these power figures can sound unimpressive, the high torque and the lower fuel consumption than a comparable gasser are a premium.
In many markets, 4-cylinder turbodiesels nearly eliminated 6-cylinder and V8 gasser trucks. One of the most notable cases is the Land Rover Defender. It was available with the Rover 3.9L V8 gasser until '97, and after the demise of this engine there were versions fitted with the BMW M52 2.8L straight-6 catering to the South African market until 2000. Since then, however, there is no gasser Defender and, after the demise of the 2.5L Td5 (5-cylinder turbodiesel) in 2007 due to emissions regulations, the only engines available for the Defender were 4-cylinder turbodiesels shared with the Ford Transit van, being a 2.4L until 2012 when a 2.2L replaced it also for emissions-related reasons.
In Brazil, for example, in '97 the Ford F-1000, local equivalent to the F-250, was available with a 2.5L Maxion HSD in a 2WD version, altough it was phased out for the following year. The 300cu.in. (4.9L) straight-6 was available for the 2WD F-1000, but wasn't so popular. In the 4WD F-1000, the 4.3L MWM X10 was the only option, mostly favored for its ruggedness in harsh environments.
In a worldwide base, 4-cylinder Diesel engines have been regarded as an effective balance between capability and fuel-efficiency. Even in special applications, such as ambulances.
Saturday, May 04, 2013
Is it worthwhile to have an utility trailer?
In many circumstances, an average light-duty car is not enought in matter of cargo volume without compromises to the passenger space, but not everybody is willing to get a truck or could afford to deal with its higher operational cost to be used only a few times at its full capabilities (or at least closer to that).
Then, an utility trailer can be considered a viable alternative to deal with unfrequent hauling needs due to its versatility, but it's important to also consider its effects over the handling and the maintenance cost. It's not unusual for trailers with a gross weight until 700kg to not feature brakes, and to be fitted with live-axle leaf-spring suspension (often without shocks) and small 13" tyres, cheaper to replace that truck tyres.
Even considering the cost of the tyres for both the trailer and a compact car, it can remain cheaper than a set of 4 truck tyres.
So, as long as the limitations of the towing vehicle are respected, an utility trailer can be a cost-effective way to conciliate hauling capacity with money savings that a truck couldn't provide.
Then, an utility trailer can be considered a viable alternative to deal with unfrequent hauling needs due to its versatility, but it's important to also consider its effects over the handling and the maintenance cost. It's not unusual for trailers with a gross weight until 700kg to not feature brakes, and to be fitted with live-axle leaf-spring suspension (often without shocks) and small 13" tyres, cheaper to replace that truck tyres.
Even considering the cost of the tyres for both the trailer and a compact car, it can remain cheaper than a set of 4 truck tyres.
Utility trailers, altough not classified as a vehicle, are usually required to have their own title and license plate.
Another favorable argument to an utility trailer is when the load can damage the pickup bed. It's particularly more critical in a modern coupé-utility, such as the Chevrolet Tornado/Montana/Opel Corsa Utility, which unibody layout makes harder to replace the body panels without compromising the structural integrity.
It's also important to consider the extra loads over the pulling vehicle's stock brakes, engine and driveline. Common-sense is recommended to ensure the trailer wouldn't compromise too much the overall safety and the durability of the vehicle, which could turn the budget aspect less favorable.
When it starts to become overkill, the problem is deeper than the anticipated replacement of tyres and brake pads, even the transmission can be severely damaged in a light-duty vehicle depending on the trailer's gross weight and the terrain conditions. A bloke who sells fresh coconut water at one of the parks of my hometown told me he once ruined the transmission of a Fiat Uno hauling coconuts with a trailer, since it had to retain lower gears with the engine at higher revvings for longer periods due to the excessive load...So, as long as the limitations of the towing vehicle are respected, an utility trailer can be a cost-effective way to conciliate hauling capacity with money savings that a truck couldn't provide.
Wednesday, March 06, 2013
Evaporative cooling: a low-budget yet energy-efficient way to improve thermal comfort in motor vehicles
The cost added by an air-conditioneer to an automobile goes beyond the retail price. During the vehicle's lifetime, the comfort charges its fare. Apart from the usual increasement on the fuel consumption, since usually the compressor is driven by the vehicle's own engine, also sacrificing the performance in certain occasions (most notably in vehicles with smaller engines, of course), a regular air-conditionner for automotive applications also implies a few more procedures to the maintenance routine, due to items such as belts and pulleys required to drive the compressor, and eventually some recharges of the refrigeration gas. A few decades ago, the most usual refrigeration gas was the CFC (Chlorine - Fluor - Carbide), also known as Freon, which is regarded as an environmentally-harmful compound due to its effect to the ozone layer, and there are still some older vehicles operating with this gas instead of the HFC-134a currently prevalent.
Basically, there are very few options for those who don't consider getting rid of some sort of cooling device in their vehicles. An option which already went quite mainstream is evaporative cooling, which got favored by many truck drivers in South America (most notably Brazil, Argentina and Uruguay) due to the ability to remain operating after the engine shutdown, since it doesn't rely on an engine-driven compressor to perform its duty. Actually, has no compressor at all... Its operation is all-electric, but it doesn't put a significantly greater charge over the electric system than a simple forced-ventilation device would do...
Considering some special applications such as hybrid-electric vehicles, like the Toyota Prius and the Chevrolet Volt, developed under a specific goal on energy-saving, the evaporative cooling is even more worthwhile. Due to the air-conditioneer of those models getting an electric-driven compressor, allowing it to remain operating when the internal-combustion engine is off, the loads at the electric system are significantly increased. An evaporative cooler has a lower energy expense, which seems to make more sense regarding a "clean" vehicle...
Another advantage is the purchase cost of an automotive evaporative cooler (often quoted in the United States and Canada as "swamp cooler"), which is on average more than 2 times cheaper than a regular air-conditioneer. Depending on the size of the vehicle's cab, the cost advantage can get even more favorable for evaporative cooling...
The operative principles are also different: an average air-conditioneer works thru the compression of a gas which circulates inside a set of metallic serpentines, leading to a partial condensation of the air humidity inside the refrigerated compartment, and subsequently the condensed water gets expelled to the outside. It's worth to note the dried air is often pointed as a source of respiratory nuisance. Meanwhile, an evaporative cooler has water directly sprayed into the air. The water ends up evaporating due to the heat absortion. A set of texturized filters avoid any ocurrence of dripping, in spite of the increasement on the air humidity.
It's also worth to remember that a regular air-conditioneer has its efficiency decreased when there is too much external air flow entering, while an evaporative cooler actually works more effectively when there is some external air flow. This ends up leading to some advantages for this setup, due to the health benefits of a higher ratio of air renovation inside the vehicle.
In spite of the purchase and maintenance costs advantage, evaporative cooling has only two major disadvantages: its efficiency slightly decreased when the ambient relative air humidity is already high, and it can't provide heating autonomously. But after a detailed case study, pointing out the pros and cons of the operational scenarioes, evaporative cooling can be revealed as the best option for many customers.
![]() |
| Brazilian Volvo N10 with an evaporative cooler. The black box behind the side ladder is a water reservoir, while the roof-mounted white one is the evaporative unit. |
Basically, there are very few options for those who don't consider getting rid of some sort of cooling device in their vehicles. An option which already went quite mainstream is evaporative cooling, which got favored by many truck drivers in South America (most notably Brazil, Argentina and Uruguay) due to the ability to remain operating after the engine shutdown, since it doesn't rely on an engine-driven compressor to perform its duty. Actually, has no compressor at all... Its operation is all-electric, but it doesn't put a significantly greater charge over the electric system than a simple forced-ventilation device would do...
![]() |
| Evaporative coolers are cheap and easy to retrofit even into older vehicles, such as this Mercedes-Benz L-1113 |
Considering some special applications such as hybrid-electric vehicles, like the Toyota Prius and the Chevrolet Volt, developed under a specific goal on energy-saving, the evaporative cooling is even more worthwhile. Due to the air-conditioneer of those models getting an electric-driven compressor, allowing it to remain operating when the internal-combustion engine is off, the loads at the electric system are significantly increased. An evaporative cooler has a lower energy expense, which seems to make more sense regarding a "clean" vehicle...
Another advantage is the purchase cost of an automotive evaporative cooler (often quoted in the United States and Canada as "swamp cooler"), which is on average more than 2 times cheaper than a regular air-conditioneer. Depending on the size of the vehicle's cab, the cost advantage can get even more favorable for evaporative cooling...
![]() |
| Brazilian Volkswagen Transporter (Kombi) fitted with 2 evaporative units: cheaper than an air-conditioneer and doesn't overload the underpowered 1.4L EA-111 flexfuel engine... |
The operative principles are also different: an average air-conditioneer works thru the compression of a gas which circulates inside a set of metallic serpentines, leading to a partial condensation of the air humidity inside the refrigerated compartment, and subsequently the condensed water gets expelled to the outside. It's worth to note the dried air is often pointed as a source of respiratory nuisance. Meanwhile, an evaporative cooler has water directly sprayed into the air. The water ends up evaporating due to the heat absortion. A set of texturized filters avoid any ocurrence of dripping, in spite of the increasement on the air humidity.
![]() |
| This coach, fitted with air-conditioneer, has sealed windows, avoiding the passengers to keep them open. |
In spite of the purchase and maintenance costs advantage, evaporative cooling has only two major disadvantages: its efficiency slightly decreased when the ambient relative air humidity is already high, and it can't provide heating autonomously. But after a detailed case study, pointing out the pros and cons of the operational scenarioes, evaporative cooling can be revealed as the best option for many customers.
Subscribe to:
Posts (Atom)
























































